8MM FORUM WORLDWIDE https://www.8mmforumworldwide.com/ |
|
EIKI RM1 take up arm problem https://www.8mmforumworldwide.com/viewtopic.php?f=13&t=2507 |
Page 1 of 1 |
Author: | Marco pellis [ Sat Feb 02, 2019 4:29 am ] |
Post subject: | EIKI RM1 take up arm problem |
EiKi RM1 : question : I have received a RM1 mint in box that had been in storage for so many years and as you know the take up Belts had completely disintegrated with time , After a good clean and lube of all rollers and some TLC the machine looks like the day it was made in the factory,and runs like a dream and sound is 100% it has the old style take up drum on the arm with the setscrew, i am looking for information on how to set this up correctly have installed new belts in both arms only slight problem the take up tension on the reel is slack with film any suggestion will be most welcome with many thanks M |
Author: | Richard C Patchett [ Sat Feb 02, 2019 10:48 am ] |
Post subject: | Re: EIKI RM1 take up arm problem |
Greetings Marco Can you take a picture of the take up arm with the belt showing and send it to patchetts@comcast.net I may have a solution for the probleme Thank you RC |
Author: | Marco pellis [ Sat Feb 02, 2019 2:58 pm ] |
Post subject: | Re: EIKI RM1 take up arm problem |
Richard C Patchett wrote: Greetings Marco Can you take a picture of the take up arm with the belt showing and send it to patchetts@comcast.net I may have a solution for the probleme Thank you RC Hi There nice of you to reply on the forum have sent you email |
Author: | Richard C Patchett [ Sun Feb 03, 2019 12:36 pm ] |
Post subject: | Re: EIKI RM1 take up arm problem |
Greetings Marco will be sending you a email soon Thank you for the pictures RC |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |