| 8MM FORUM WORLDWIDE https://www.8mmforumworldwide.com/ |
|
| SANKYO 700 WILL NOT THREAD FILM AT START https://www.8mmforumworldwide.com/viewtopic.php?f=8&t=2364 |
Page 1 of 1 |
| Author: | thomas mcnamara [ Sun Apr 01, 2018 6:07 pm ] |
| Post subject: | SANKYO 700 WILL NOT THREAD FILM AT START |
here we go again!!! my sankyo will not thread film at the start properly, it starts to thread thru unit, but then it starts to get chewed. I have checked to see if their is any film stuck inside the film gate or elsewhere but nothing. I am threading correctly. it is an automatic thread unit as well. really frustrating with this unit at times, never know whats going to occur. if this keeps up w/having problems, going to put this thing stored away an just watch the oldies on youtube. |
|
| Author: | Leon Norris [ Tue Dec 25, 2018 3:04 pm ] |
| Post subject: | Re: SANKYO 700 WILL NOT THREAD FILM AT START |
Thomas, It sounds like the film claw is bad or out of adjustment ? That could be the problem. Good luck! Leon Norris from Leon's Elmo projector Repair. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|