Chris, Replace the micro switch? It sounds like the micro switch is bad! Let me know how you made out! Good luck! Leon Norris from Leon's Elmo projector Repair.
![[set5_b/set5_b/svengo.gif]](./images/smilies/set5_b/set5_b/svengo.gif "svengo")
| 8MM FORUM WORLDWIDE https://www.8mmforumworldwide.com/ |
|
| Bell & Howell 33SR Lamp Problem https://www.8mmforumworldwide.com/viewtopic.php?f=8&t=2395 |
Page 1 of 1 |
| Author: | Chris Haines [ Sat Sep 01, 2018 6:00 am ] |
| Post subject: | Bell & Howell 33SR Lamp Problem |
Hi Can anybody help? My old Bell & Howell sound projector lamp will not brighten. It works in low light mode - when threading the film through/rewinding etc - but when I turn the switch to play it goes off! I have tired cleaning the pin contacts and a new bulb. Any help appreciated. Apologies if this is the wrong forum. |
|
| Author: | Chris Smith [ Mon Sep 03, 2018 7:58 pm ] |
| Post subject: | Re: Bell & Howell 33SR Lamp Problem |
Hello Chris, and welcome to the Forum. Never had a chance to meet a 33SR, but I have some ideas and will research a bit on your problem. Anyone out there experience anything like this? |
|
| Author: | Leon Norris [ Sat Dec 15, 2018 7:40 pm ] |
| Post subject: | Re: Bell & Howell 33SR Lamp Problem |
Chris, Replace the micro switch? It sounds like the micro switch is bad! Let me know how you made out! Good luck! Leon Norris from Leon's Elmo projector Repair.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|