8MM FORUM WORLDWIDE https://www.8mmforumworldwide.com/ |
|
Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue https://www.8mmforumworldwide.com/viewtopic.php?f=13&t=2354 |
Page 2 of 2 |
Author: | Ken Segal [ Tue Feb 13, 2018 2:54 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
Actual test. https://vimeo.com/255604964 |
Author: | Ken Segal [ Tue Feb 13, 2018 3:21 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
So now I'm really looking close at the rollers I replaced. Though they're plenty loose, the film isn't moving them. When I coax them, everything falls into place including the optical eye. I hear sound. Then the machine settles into its groove and the rollers no longer make the proper contact and the sound vanishes. So where do I purchase rubber rollers? |
Author: | Richard C Patchett [ Tue Feb 13, 2018 3:45 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
Greetings Before you buy the rubber rollers Un loosen the nut on the Large flange roller And move that roller back an forth to get better sound with film when you get better sound re tighten the nut Did you lube the roller shafts ? I have the correct rollers in stock there on my web site RC |
Author: | Ken Segal [ Tue Feb 13, 2018 3:51 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
I flipped over one of the new rollers and it now makes full contact and works! Thank you for pointing me in the right direction. I’ll be checking out your web site. Thanks again. |
Author: | Richard C Patchett [ Tue Feb 13, 2018 3:54 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
Greetings Glad to be of service Happy film showings RC |
Author: | Ken Segal [ Tue Feb 13, 2018 7:36 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
I celebrated too early. Life got in the way and I had to run out after the most basic of checks. So the sound is there, but it's kinda low and very scratchy. Like an old 78 speed record. Possibly the volume control itself? |
Author: | Ken Segal [ Wed Feb 14, 2018 2:27 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
I've tried loosening the nut on the large flange roller to adjust the sound, but it has no wiggle room. Still have scratchy sound. |
Author: | Richard C Patchett [ Wed Feb 14, 2018 2:31 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
Greetings Without running the film Turn the volume control knob back & forth Do you still get the low and very scratchy sound? RC |
Author: | Ken Segal [ Wed Feb 14, 2018 3:00 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
Nope. Scratchy only when film is running. |
Author: | Richard C Patchett [ Wed Feb 14, 2018 3:11 pm ] |
Post subject: | Re: Elmo 16-CL/Kodak Ektagraphic CT1000 sound issue |
Greetings Replied to your email |
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |